Curly Hair Tutorial for Amigurumi Doll Versatile FREE Crochet Pattern

Even though this looks like a very elaborated technique, I promise it’s not! What it very much is, is versatile. Because even though it’s only a tutorial for “curly” hair you can build it up or down to create very different styles:

Believe it or not, these were all done the same way!

If you’d like to use the same doll base as I use, you can find it here.

The ad-free and printable version of this pattern can be found here.

The definitions for all crochet abbreviations used can be found here.

ABBREVIATIONS (AMERICAN TERMS)

  • MC: Magic Circle
  • Ch: Chain
  • Sc: Single Crochet
  • Sc inc: Single crochet Increment

Materials Needed:

  • 4.5mm Crochet Hook
  • Medium Weight Yarn (Used: Red Heart Super Saver in Warm Brown)
  • Scissors
  • Yarn needle (metal recommended)
  • Pins

Pattern

OPTIONAL WIG CAP:

This creates a wig cap that can be sewn onto the Basic Doll Base to cover any “bald spots” in case you’re worried about the background color showing through the hair.

Using the same color as the hair:

  • Round 1: MC, 6sc (6) set your marker
  • Round 2: 6 sc inc (12)
  • Round 3: (1sc, 1 sc inc) x6 (18)
  • Round 4: (1sc, 1 sc inc, 1sc) x6 (24)
  • Round 5: (3sc, 1 sc inc) x6 (30)
  • Round 6: (2sc, 1 sc inc, 2sc) x6 (36)
  • Round 7-14: Sc  around. (8 rounds), (36), Fasten off and leave a long tail for sewing, about 20 inches.

Place the wig cap on top of the doll’s head and align it as you please, I like to make it so that the back of the hairline almost touches the neck. Sew the outer loop of each stitch onto the doll.

CURLS:

You will need approximately 8 strands to cover the whole wig cap, and from then you can add more as you please to change the shape and volume of the hair.

  • Round 1: Leave a 2 inch tail at the start. Ch 51, turn around, skip the first stitch and work 50 Sc inc. Fasten off and leave a long tail for sewing, about 12 inches.

This completes one curl. Place the tip of the curl facing inwards so that it frames the face and pin it in place if you’d like. Place the rest of the curl as shown below, working in an “S” shape:

You can hold it in place as you sew it, or you can place a few pins to hold it and remove them as you go. Careful not to leave any pins in the doll! 

Hide the short yarn tail inside the doll’s head, grab the next strand and repeat the process until the entire head is covered.

 I find that the curls right around the face of the doll should be the most detailed ones, as they are your work’s frame, in a way.  If you’d like more volume, layer the curls until the hair looks just like you pictured it. For example, this character called for more “box-y” shaped hair, so I kept adding curls to the sides until it almost looked like it had corners.

The advantage of doing 51 chains at a time is that you get a manageable length for every curl, and it is easier to work up to the style that you want instead of having “leftover” hair. But you’re free to do a 100+ chain to begin with if that’s what you’d like!

Thank you for following along! As you can see, this is more of a “tutorial” rather than a pattern, so I’m excited to see all the variations that you guys make ♥

I’D LOVE TO SEE YOUR PROJECTS! IF YOU HAVE PROGRESS PICTURES OR WANT TO SHARE YOUR FINISHED PROJECT PLEASE TAG NANO STITCHES ON SOCIAL MEDIA

You may sell your product providing pattern credit to Nano Stitches on Instagram, Etsy, Facebook, Twitter, Pinterest, Ravelry or any other social media in which you advertise. The pattern itself shall not be copied. If you sell the items you must use your own pictures for advertising. If you need assistance during the process or find someone else selling my pattern feel free to contact me on social media  or email me at nanostitches9@gmail.com

Basic Doll Base Chibi Amigurumi // Nerdy FREE Crochet Pattern

I have played around and re-designed the doll base that I use for my amigurumi over the last couple of years. I prefer to make them look more like caricatures rather than hyper realistic figurines. This involves a lot of experimenting witrh their proportions and their size, but I have finally designed the pattern that makes them look amazing every single time ♥

Making amigurumi is kind of like using building blocks where you pick a doll base + a specific hair style + clothes + accessories. Which is why I made Build Ami, the Amigurumi Series on how to make any amigurumi you want piece by piece.

The ad-free and printable version of this pattern can be found here.

The definitions for all crochet abbreviations used can be found here.

Materials Needed:

  • 4.50mm Crochet Hook
  • Medium Weight Yarn (Red Heart Super Saver)
  • Polyester Fiberfill
  • Scissors
  • Yarn needle (metal recommended)
  • Stitch Marker (improvised markers: paper clip, bobby pin, piece of different color yarn)
  • 12mm Safety eyes and their backings (optional)

Pattern

This entire pattern is worked in the round and most of it is a single piece.

  • Round 1: MC, 6sc (6) set your marker
  • Round 2: 6 sc inc (12)
  • Round 3: (1sc, 1 sc inc) x6 (18)
  • Round 4: (1sc, 1 sc inc, 1sc) x6 (24)
  • Round 5: (3sc, 1 sc inc) x6 (30)
  • Round 6: (2sc, 1 sc inc, 2sc) x6 (36)
  • Round 7-14: Sc  around. Re-place your stitch marker after completing each row.
    (8 rounds), (36)

ADDING SAFETY EYES:

Skip this section if you’re not using safety eyes. The eyes will be placed between rounds 10 and 11, after the last stitch from round 10 count 5 stitches to the left and place the first safety eye into the next space. Count to the left and place the second eye in the 7th space from the first eye.
In the pictures below, the stitches are placed at the end of rounds 10 and 14.

  • Round 15: (2sc, 1 sc dec, 2sc) x6 (30)
  • Round 16: (3sc, 1 sc dec) x6 (24)
  • Round 17: (1sc, 1 sc dec, 1sc) x6 (18)
  • Round 18: (1sc, 1 sc dec) x6 (12)
  • Round 19: (1sc, 1 sc dec) x4 (8)
  • Round 20: (1sc, 1 sc inc) x6 (12)
  • Round 21: (1sc, 1 sc inc) x6 (18)
  • Round 22: (1sc, 1 sc inc, 1sc) x6 (24)
  • Round 23: (3sc, 1 sc inc) x6 (30)

Count 7 stitches after the end of this round and sc into the 8th. This creates the first arm hole, we will not work on it until further on. Single crochet a total of 8 stitches across, count 7 stitches to leave untouched and sc into the 8th stitch, sc across for a total of 8 stitches. This completes the first row of the torso.

VERIFY YOUR COUNTING: You should have 2 arm holes consisting of 7 sc each and this first row of the torso should be a total of 16 stitches around.

Set your stitch marker and sc for 5 more rows for a total of 6 sc rows.

LEGS

Since working in the round offsets the stitches, keep track of the end of each row. At the end of the torso’s 6th round:

  • Round 1: Sc 3 (pictured on the right), count 8 stitches back, you should now be on the opposite side of the torso, sc into this 8th stitch, sc 5 to complete the first round

VERIFY YOUR COUNT:
You should now have divided the torso into two equal-sized holes for each leg. (8 stitches each)

Round 2-7: Sc all around

After 7 rounds, sl st and fasten off leaving a 4 inch tail. Using your yarn needle go through the outer loop of each stitch and then pull the tail to close the opening. Hide the yarn end inside.

Attach the yarn at the base of the torso next to the first leg and sc around. To close the gap between the union between the legs grab a random stitch from the middle of the first leg as well as both loops from the next stitch and work a single crochet. This completes the first round. Continue with sc all around for 6 more rounds and close the leg just like you closed the first one.

ARMS

Attach the yarn to a stitch on the corner of an arm gap, sc 7 around and work one sc on the “armpit” area (pictured). There is no evident space to place this sc but you need it in order to have proportionality between arms and legs.

This completes the first round. Sc around for 6 more rows for a total of 7.  Sl st and fasten off leaving a 4 inch tail. Using your yarn needle go through the outer loop of each stitch and then pull the tail to close the opening. Hide the yarn end inside.

Repeat this process on the other side to make the second arm.

This completes the Basic Doll Base pattern. You can add and change details however you need!

Thank you so much for choosing my pattern!
If you liked this design please consider leaving a tip in the Tip Jar below (but don’t feel obligated to!)

I’D LOVE TO SEE YOUR PROJECTS! IF YOU HAVE PROGRESS PICTURES OR WANT TO SHARE YOUR FINISHED PROJECT PLEASE TAG NANO STITCHES ON SOCIAL MEDIA

You may sell your product providing pattern credit to Nano Stitches on Instagram, Etsy, Facebook, Twitter, Pinterest, Ravelry or any other social media in which you advertise. The pattern itself shall not be copied. If you sell the items you must use your own pictures for advertising. If you need assistance during the process or find someone else selling my pattern feel free to contact me on social media  or email me at nanostitches9@gmail.com

Black Lives Matter FREE Yarn Bomb Banner // Crochet Pattern

Personally, I would love to be marching along with the people demanding justice, but my immunodeficiency and this pandemic keep me indoors. I figured that I cannot be the only one in this situation, and what do people do when they spend a lot of time indoors? We crochet!

This is a small project that you can use to display your support for the BLM movement, but why stop there? If you purchase this $1.30 printable and ad-free pattern I will donate 100% of the proceeds to the BLM movement.

PURCHASE PATTERN TO DONATE

The definitions for all crochet abbreviations used can be found here.

Gauge:

In a 1 inch by 1 inch square of stitches there should be 4 sc and 4 rows of sc.

Materials Needed:

  • 4.50mm Crochet Hook
  • Medium Weight Yarn (Red Heart Super Saver)
  • Scissors
  • Yarn needle (metal recommended)

NOTE

The number in parenthesis is the number of stitches you should make in the indicated color, for example: B (10) means: “sc 10  in Black.”
And W (5) means: “sc 5 in white”

In this pattern, black will correspond to the background, and white will be the font color, but feel free to change this as you please!

The most prominent lines place a mark every five spaces for better reference when counting. For the given gauge, a base of 88 stitches should be enough for the average street light post of 11’’ diameter, but keep in mind that this might be too much or too little for some posts. This graph was placed in the very middle of the banner. If you’re not sure how to read this graph, the witten instructions can be found below:

PATTERN

Starting out with black, for the background:

  • Row 1: Ch 89, B(88)
  • Row 2 and 3: Ch 1 and B(88)
  • Row 4: Ch 1, B(29), W(6), B(4), W(7), B(2), W(3), B(5), W(3), B(29)
  • Row 5: Ch 1, B(29),  W(3), B(5), W(3), B(2), W(7), B(3), W(7), B(29)
  • Row 6: Ch 1, B(29), W(3), B(2), W(3), B(2), W(3), B(6), W(3), B(5), W(3), B(29)
  • Row 7: Ch 1, B(29), W(3), B(5), W(3), B(6), W(3), B(2), W(3), B(2), W(3), B(29)
  • Row 8: Ch 1, B(29), W(8), B(2), W(3), B(6), W(3), B(2), W(1), B(2), W(3), B(29)
  • Row 9: Ch 1: B(29), W(3), B(1), W(3), B(1), W(3), B(6), W(3), B(4), W(6), B(29)
  • Row 10: Ch 1: B(29), W(3), B(1), W(3), B(3), W(3), B(6), W(11), B(29)
  • Row 11: Ch 1: B(2), W(5), B(1), W(5), B(6), W(3), B(3), W(3), B(1), W(3), B(29)
  • Row 12: Ch 1: B(29), W(6), B(4), W(3), B(6), W(4), B(3), W(4), B(29)
  • Row 13: Ch 1: B(29), W(3), B(5), W(3), B(6), W(3), B(5), W(5), B(29)
  • Row 14 – 16: Ch 1, B(88) (3 rows), sl st and fasten off, leaving a 12’’ long tail for sewing.

Using a yarn needle (metal recommended) sew the sides of the banner together around the surface that you’d like to display your work. It doesn’t need to be the most neat sewing technique, but the banner needs to be tight to avoid it slipping down.

I’D LOVE TO SEE YOUR SUPPORT! IF YOU HAVE PROGRESS PICTURES OR WANT TO SHARE YOUR FINISHED PROJECT PLEASE TAG NANO STITCHES ON SOCIAL MEDIA

Instagram, Etsy, Facebook, Twitter, Pinterest, Ravelry.
100% of the proceeds will be donated to the BLM movement. The pattern itself shall not be resold or copied. If you need assistance during the process or find someone else selling my pattern feel free to contact me on social media  or email me at nanostitches9@gmail.com

Face Mask Key chain FREE Crochet Amigurumi Pattern // Quarantine Makes

A quick and cute crochet pattern to brighten up your day and keep your hands busy during this 2020 quarantine ♥.

This project can be done in less than an hour and it is beginner friendly!

I made this little design as a comic relief to our collective stress and (hopefully) as small aid to my current financial situation. This tiny face mask is meant to bring you some joy in these most strange of times.

For decorative purposes only.

The definitions for all crochet abbreviations used can be found here.
If you’d like a printable and ad-free version of this pattern just click here.

Materials:

  • 4.5mm Crochet Hook
  • 6mm Safety eyes and their backings
  • 1oz Light Blue yarn
  • <1oz White yarn 
  • <1 yard of black embroidery floss
  • Yarn needle (metal recommended)

Pattern:

Working with light blue yarn:

  • Row 1: Chain 4, turn your work, skip the first stitch and sc across (3)
  • Row 2: Chain 1, turn your work, Sc inc in the next stitch, Sc 1, and Sc inc in the last stitch (5)
  • Row 3: Chain 1, turn your work, Sc inc in the next stitch, Sc 3, and Sc inc in the last stitch (7)
  • Row 4 – 8: Chain 1, turn your work, and Sc 7 across (5 rows) (7)
  • Row 9: Chain 1, turn your work, Sc dec 1, Sc 3 across, Sc dec 1 (5)
  • Row 10:  Chain 1, turn your work, Sc dec 1, Sc 1 across, Sc dec 1 (3)

Fasten off and make another piece, but DON’T fasten off at the end of the second piece. Align the pieces and slip stitch around both to join them, before it is completely closed, move to the next page.

Face Details:

While the bottom of your work is still open, place safety eyes in place, one between rows 3 and 4 and another between rows 7 and 8. They should be 4 rows apart and between the 3rd and 4th stitch of each row so that they are as centered as possible. 

Using the embroidery floss and the yarn needle, draw a “v” between both eyes. It should be about one single crochet wide. 

When you are done with these details, finish closing the pieces with slip stitches. Fasten off leaving a 2 inch tail.

Side handles:

Leaving a 2 inch tail, attach the white yarn to one of the corners with a slip stitch. Chain 11 and slip stitch to the nearest corner. Fasten off leaving a 2 inch tail. Repeat the same process for the corners on the other side of the mask and, finally, hide all yarn tails inside of the “mask”. 

Pro-tip:
Leaving slightly longer tails makes it harder for them to poke out of your work once you have hidden them!

And you’re done!
I added a keychain at the top of the mask so that I could carry my tiny mask around, which you can totally do too!:)

Thank you so much for choosing my pattern!
If you liked this design please consider leaving a tip in the Tip Jar below (but don’t feel obligated to!)

I’D LOVE TO SEE YOUR PROJECTS! IF YOU HAVE PROGRESS PICTURES OR WANT TO SHARE YOUR FINISHED PROJECT PLEASE TAG NANO STITCHES ON SOCIAL MEDIA

You may sell your product providing pattern credit to Nano Stitches on Instagram, Etsy, Facebook, Twitter, Pinterest, Ravelry or any other social media in which you advertise. The pattern itself shall not be copied. If you sell the items you must use your own pictures for advertising. If you need assistance during the process or find someone else selling my pattern feel free to contact me on social media  or email me at nanostitches9@gmail.com

New Year’s Crafty Resolution: Crochet Temperature Blanket

Happy 2020!

There is so much excitement and hopefulness all around us as we begin a new year. There is just something about the sound of “2020” that makes it sound so futuristic and clean. For better or for worse I bet this will be a truly memorable year, and for that I invite you to join me in this year-long crochet craft.

If you’ve never done any crochet this is a totally beginner friendly project, all you need is patience, persistence, and lots of yarn.

Temperature Blanket

If you’ve never heard of this project before, the idea is that every day you take the average temperature of the place you live in, you designate a color to every temperature range and every day you crochet a single line of the designated color. By new year’s you’ll a blanket that’s 365 lines long (366 in this case, yay leap year!). 

To keep a nice proportion, I did a 150 chain for the base, you chain one at the end of each row, turn your work, and either change your color or carry on. You can do simple single crochet stitches all across the row, this makes an even and simple result. Personally I liked the idea of the colors interlocking each other so I chose to work with the moss stitch.

To work with the moss stitch the very first row needs to be all single crochet. For the rest of the rows chain one at the start, and then alternate:

1 Single crochet, 1 chain, skip 1 stitch and single crochet in the next.

This way you have a gap every other stitch. On the next row you’ll do the single crochet in the gap rather than on top of the single crochet of the last row. After a couple of rows you’ll see how this makes the colors interlock!

My Materials:

Medium weight yarn and a 4.5mm hook. Decided to work with cotton yarn since it’s a lot softer than acrylic and it wont pill as much.

I’ll try to keep a neat temperature log and update my progress, if you decided to start your very own blanket make sure to post a picture in the comments!

Good luck and Happy New Year!

Squishy Baby Yoda Amigurumi Nerdy FREE Crochet Pattern

Need a last minute present? You can work this pattern in about 3 hours!

The definitions for all crochet abbreviations used can be found here.
If you’d like a printable and ad-free version of this pattern just click here.

Let’s just jump right into it:

Materials:

  • 4.5mm Crochet Hook
  • 12mm Safety eyes and their backings
  • 1oz Light Brown yarn (Red Hearts Super Saver in “Buff”)
  • <1oz Beige yarn (Loops and Threads, Impeccable in “Aran”)
  • 1oz Green yarn (Loops and Threads, Impeccable in “Fern”)
  • <1oz Pink yarn (Red Hearts Super Saver in “Flamingo”)
  • 1oz Fiber fill stuffing
  • Yarn needle (metal recommended)

Pattern:

All of the pieces are worked in the round.

BODY:

Using Green yarn, don’t chain between rounds:

  • Round 1: MC, 6sc (6) set your marker
  • Round 2: 6 sc inc (12)
  • Round 3: (1sc, 1 sc inc) x6 (18)
  • Round 4: (1sc, 1 sc inc, 1sc) x6 (24)
  • Round 5: (3sc, 1 sc inc) x6 (30)
  • Round 6-10: Sc all around (5 rows), sl st and cut green yarn off (30)

Place safety eyes between rounds 8 and 9 and with 4 sc between them..

  • Round 11-20: Change to Light Brown yarn, sc all around (10 rows) (30)
  • Round 21: (3sc, 1 sc dec) x6 (24)
  • Round 22: (1sc, 1 sc dec, 1sc) x6 (18)

This is a good point to stuff with fiber fill.

  • Round 23: (1sc, 1 sc dec) x6 (12)
  • Round 24:  6 sc dec (6). Leave a yarn tail about 10 inches long and use your yarn needle to go though the outside loop of these remaining stitches, then pull the yarn to close the opening.

EARS:

Repeat twice to make 2 ears. Using Green yarn, don’t chain between rounds:

  • Round 1: MC, 6sc (6) set your marker
  • Round 2: 6 sc inc (12)
  • Round 3-5: Sc all around (3 rounds) (12)
  • Round 6: (1 sc, 1 sc dec) x4, fasten off and leave a 6 inch yarn tail for sewing (8)

ARMS:

Repeat twice to make 2 arms. Using Green yarn, don’t chain between rounds:

  • Round 1: MC, 8sc (8) set your marker
  • Round 2 and 3: Sc all around (8)

Sl st and cut off green yarn.

  • Round 4-6: Attach Light brown yarn and sc all around (3 rounds) (8)
  • Round 7: Ch 1, turn your work, sc 3, ch 1 and fasten off leaving a 6 inch yarn tail for sewing (8)

Pin the arms to the body’s sides. They should be at a slight inward angle and the top corner should be placed 1 brown row down (right after round 11). After you are satisfied with the look, slightly stuff them with fiber fill and sew the arms to the body.

SCARF:

  • Round 1: Using Beige yarn, sl st around any post of the body’s 10th round (last green round). Ch 1, Sc around every post in this row. (30)
  • Round 2-4: Sl st into last round’s first sc, ch 1, and sc all around (3 rounds), (30)

After round 4, sl st into the first sc and fasten off the yarn, weave the end into the scarf and into the body.

FINAL DETAILS:

Flatten the ears and sew them in place, in directly opposite sides of the head and about one row above the scarf. OPTIONAL: sew a small pink glisten on the outside eye corners to create a “blush”.

And you’re done! Enjoy your little beanie baby Yoda ♥

Thank you so much for choosing my pattern!
If you liked this design please consider leaving a tip in the Tip Jar below (but don’t feel obligated to!)

I’D LOVE TO SEE YOUR PROJECTS! IF YOU HAVE PROGRESS PICTURES OR WANT TO SHARE YOUR FINISHED PROJECT PLEASE TAG NANO STITCHES ON SOCIAL MEDIA

You may sell your product providing pattern credit to Nano Stitches on Instagram, Etsy, Facebook, Twitter, Pinterest, Ravelry or any other social media in which you advertise. The pattern itself shall not be copied. If you sell the items you must use your own pictures for advertising. If you need assistance during the process or find someone else selling my pattern feel free to contact me on social media  or email me at nanostitches9@gmail.com

Baby Yoda Christmas Ornament Nerdy FREE Crochet Pattern

I haven’t even watched the Mandalorian but I finally finished the semester and I have time off to do as much crochet as I like ❤️This is a pattern that you can work out in less than two hours, so it’s the perfect way to go if you need a last minute gift or decoration!

The definitions for all crochet abbreviations used can be found here.

If you’d like a printable and ad-free version of this pattern just click here.

Materials:

  • 4.5mm Crochet Hook
  • 6mm Safety eyes and their backings
  • <1oz Gray yarn (Red Hearts Super Saver in “Dusty Gray”)
  • <1oz Brown yarn (Red Hearts Super Saver in “Coffee”)
  • <1oz Green yarn (Loops and Threads, Impeccable in “Fern”)
  • <1oz Pink yarn (Red Hearts Super Saver in “Flamingo”)
  • <1oz Fiber Fill stuffing
  • Yarn needle (metal recommended)

Pattern:

All of the pieces are worked in the round.

POD:

Using Gray yarn, don’t chain between rounds:

  • Round 1: MC, 6sc (6) set your marker
  • Round 2: 6 sc inc (12)
  • Round 3: (1sc, 1 sc inc) x6 (18)
  • Round 4: (1sc, 1 sc inc, 1sc) x6 (24)
  • Round 5: (3sc, 1 sc inc) x6 (30)
  • Round 6: (2sc, 1 sc inc, 2sc) x6 (36)
  • Round 7-10: Sc around (4 rounds), (36)
  • Round 11: Set your marker and Sc 18 (18)
  • Round 12: Ch1, sc 18 (18)
  • Round 13; Ch 1, sc 18 (18)
  • Round 14: Ch1, (2 sc, 1 sc dec, 2 sc) x3 (15)
  • Round 15: Ch1, (3 sc, 1sc dec) x3 (12)
  • Round 16: Ch1, (1sc, 1sc dec, 1sc dec) x3 (9)
  • Round 17: Ch1, (1sc, 1sc dec) x3 (6)
  • Round 18: Ch1 3sc dec, sl st and yarn off(3)

Using Brown yarn, don’t chain between rounds:

  • Round 1: MC, 6sc (6) set your marker
  • Round 2: 6 sc inc (12)
  • Round 3: (1sc, 1 sc inc) x6 (18)
  • Round 4: (1sc, 1 sc inc, 1sc) x6 (24)
  • Round 5: (3sc, 1 sc inc) x6 (30)
  • Round 6: (2sc, 1 sc inc, 2sc) x6, sl st into the next stitch and yarn off (36)

Fold the brown circle into an L shape and sew it to the edge of the gray piece. The stitch count is the same, so sewing should be failry easy. When the pieces are almost sewn shut, stuff the pod with fiber fill and finish sewing.

HEAD:

Using Green yarn, don’t chain between rounds:

  • Round 1: MC, 4sc (4) set your marker
  • Round 2: 4 sc inc (8)
  • Round 3: (1sc, 1 sc inc) x4 (12)
  • Round 4: 12 sc, sl st into the next stitch, yarn off (12)

Attach the safety eyes between rounds 3 and 4 with one stitch between them. Sew the head to the brown base of the sphere using green yarn.

EARS:

Using Green yarn: Chain 4, skip the first stitch and sl st into the second one. Sc into the next stitch and sl st in the next. Ch 2, now you will be working on the UNDERSIDE of the chain, skip the two chains you just made and sl st into the stitch you did the last sl st. Sc into the next stitch and sl st in the next. Make a final sl st if you deem necessary. Fasten off and leave a 6 inch tail of yarn for sewing.

SCARF:

Working with Beige yarn:
Ch 15, sl st to first chain to form a loop. Ch 1, sc 15 all around, sl st at end of round, fasten off leaving a long tail for sewing.

FINAL DETAILS

Fix the scarf around the head leaving the eyes exposed and sew it with beige yarn.
After the scarf is done sew the ears to the sides of the head.
Add two small “blushes” to the corners of the eyes with pink yarn
and hide all the yarn ends onside the pod before cutting the excess off.
To make it an ornament just cut an 8 to 10 piece or gray yarn and thread it through the top stitches of the pod.

And voilá! Your little ornament is done!

Thank you so much for choosing my pattern!
If you liked this design please consider leaving a tip in the Tip Jar below (but don’t feel obligated to!)

I’D LOVE TO SEE YOUR PROJECTS! IF YOU HAVE PROGRESS PICTURES OR WANT TO SHARE YOUR FINISHED PROJECT PLEASE TAG NANO STITCHES ON SOCIAL MEDIA

You may sell your product providing pattern credit to Nano Stitches on Instagram, Etsy, Facebook, Twitter, Pinterest, Ravelry or any other social media in which you advertise. The pattern itself shall not be copied. If you sell the items you must use your own pictures for advertising. If you need assistance during the process or find someone else selling my pattern feel free to contact me on social media  or email me at nanostitches9@gmail.com

Pokemon Inspired Oddish Nerdy FREE Crochet Pattern

Simple and essential to your Pokemon amigurumi collection, this Oddish crochet pattern is easy to follow and totally beginner friendly. Its round shape makes it easy to crochet and it kind of double as a stress reliving ball!

Materials Needed:

  • 4.50mm Crochet Hook
  • Medium Weight Yarn in Steel Blue and Bright Green. The actual colors used were Lion Brand Vanna’s Choice in “Sky Blue” and Crafter’s Secret in “Jelly Bean”.
  • Polyester Fiberfill.
  • Red felt (about a 2inch square)
  • 10 inches of white embroidery floss
  • 10 inches of black embroidery floss
  • 10 inches of red embroidery floss
  • 10 inches of pink medium weight yarn (optional)
  • Scissors
  • Yarn needle (metal recommended).
  • Sewing Pins (about 10)
  • Stitch Marker (improvised markers: paper clip, bobby pin, piece of different color yarn)

Gauge

4X4 Sc for every square inch.

If you’d like a printable and ad-free version of this pattern you can find it here.

The definitions for all crochet abbreviations used can be found here.

Pattern

BODY

Working with the blue yarn.

WORKED IN THE ROUND

  • Round 1: MC, 6sc (6) set your marker
  • Round 2: 6 sc inc (12)
  • Round 3: (1sc, 1 sc inc) x6 (18)
  • Round 4: (1sc, 1 sc inc, 1sc) x6 (24)
  • Round 5: (3sc, 1 sc inc) x6 (30)
  • Round 6: (2sc, 1 sc inc, 2sc) x6 (36)
  • Round 7: (5sc, 1 sc inc) x6 (42) set your marker
  • Round 8 – 16: Sc around (9 rounds) (42)
  • Round 17: (5sc,  sc dec) x6 (36)
  • Round 18: (2sc,  sc dec, 2sc) x6 (30)
  • Round 19: (3sc,  sc dec) x6 (24)
  • Round 20: (1sc,  sc dec, 1sc) x6 (18) Stuff generously with fiberfill.
  • Round 21: (1sc,  sc dec) x6 (12)
  • Round 22: 6 sc dec (6) Leave a yarn tail about 10 inches long and use your yarn needle to go though the outside loop of these remaining stitches, then pull the yarn to close the opening.

FEET

Working with the blue yarn, repeat twice for two feet.

WORKED IN THE ROUND

  • Round 1: MC, 6sc (6) set your marker
  • Round 2: 6 sc inc (12)
  • Round 3: (1sc, 1 sc inc) x6 (18)
  • Round 4 – 6: Sc around (3 rounds) (18) Fasten off, leaving a 6 inch yarn tail for sewing.

TOP LEAVES

Working with the green yarn.

WORKED IN THE ROUND

  • Round 1: MC, 4sc (4) set your marker
  • Round 2: 4sc (4)
  • Round 3: 4 Sc inc (8)
  • Round 4: 8 Sc (8)
  • Round 5: (1sc, Sc inc) x4 (12)
  • Round 6 – 10: Sc around (12)
  • Round 11: (1sc, Sc dec) x4 (8)
  • Round 12: 8s, sl st and fasten off, leaving a 6 inch yarn tail for sewing.

Repeat this whole process 5 times for a total of 5 leaves.

ASSEMBLING

Place the feet a little more to the front of the body than the bottom to make Oddish able to sit. Pin them in place and begin to sew them, stuffing lightly as you go.

All five leaves will go on top of the body, but strategically placed.

The first leaf will be centered at the front as shown in the picture (left), the following two will go right behind this one, but widely open. The last two will go behind all previous ones and should “peak” through the leaves on the front as shown in the picture (right).

DETAILING THE FACE

Cut two circles of red felt of about 1cm in diameter and sew them between rounds 10 and 11 of the body, 5 Sc apart using the red embroidery floss. I sewed them on with only two stitches each at the edge of each eye.

The white “twinkle” on the eyes is made with a very simple over and under motion using the white embroidery floss.

The very last step is to draw the mouth with black embroidery floss, for this you will draw a very long “v”. Start one row below the eyes, go down one row and two sc to the side for the first stitch, and two sc to the side and one row up to make the second sitch.

And you’re done! You now have this adorable Oddish for your Pokemon collection.

I’D LOVE TO SEE YOUR PROJECTS! IF YOU HAVE PROGRESS PICTURES OR WANT TO SHARE YOUR FINISHED PROJECT PLEASE TAG NANO STITCHES ON SOCIAL MEDIA!

You may sell your product providing pattern credit to Nano Stitches on Instagram, Etsy, Facebook, Twitter, Pinterest, Ravelry or any other social media in which you advertise. The pattern itself shall not be copied. If you sell the items you must use your own pictures for advertising. If you need assistance during the process or find someone else selling my pattern feel free to contact me on social media  or email me at nanostitches9@gmail.com

Cookie Cat From Steven Universe Nerdy FREE Crochet Pattern

Steven Universe has been one of my favorite shows for years now! My philosophy towards cartoons is that if a kids show is only enjoyed by kids, it’s probably not a good show. And this is something that Steven Universe has tackled from its very beginnings. And still, we are blessed with silly little things that warm our hearts, like Cookie Cat!

Looking at how much Steven has grown from season 1 until 5 it’s good to remember when his biggest problem was his favorite ice cream being discontinued.

If you’d like a printable and ad-free version of this pattern you can find it here.

Without further adieu, let’s get stitching!

MATERIALS NEEDED

  • G/6 – 4.25mm Crochet Hook
  • Yarn Needle
  • Scissors
  • Polyester Fiberfill ( Less than an ounce)
  • Medium Weight Yarn (Brown, Pastel Pink, and White)
  • Yarn Description
  • Approximately:
  • 70 yards of Brown yarn 
  • 17 yards of Pastel Pink yarn
  • 17 yards of White yarn

All yarn used was Red Heart Super Saver.

The definitions for all crochet abbreviations used can be found here.

THE COOKIES

IN THE ROUND.

  • Round 1: Ch 7, skip the first ch and work 3 sc into the second one, 4 sc across, 5 sc into the last ch. Working UNDERNEATH the chain. 4 sc across, 2 sc into the last ch. (18)
  • Round 2: Sc inc, Sc inc, 6 sc across, 3 sc inc, 6 sc, Sc inc. (24)
  • Round 3: 4 Sc inc, sc 7 across, 5 Sc inc, sc 8 across (33)
  • Round 4: 6 Sc inc, sc 10 across, 6 Sc inc, sc 12 across (46)
  • Round 5: First ear. Ch 1, turn around and 4 sc.
  •  Round 6: Ch 1, turn around, 2 Sc Dec.
  • Round 7: Ch 1, turn around, 1 Sc Dec, tie off.

Count 4 stitches next to the ear, reattach yarn in the 4th stitch and repeat rounds 5, 6 and 7 to mane the second ear.

Single Crochet all around the cookie, tie off at the tip of the second ear. (50-52 sts).

Repeat the whole “cookie” process a second time.

THE “ICE CREAM”

Working with the pastel pink yarn, ch 4, skip the first chain

  • Rows 1- 28: 3 sc across, ch 1, turn, and repeat.

When you have finished the 28 rows change to white yarn and crochet another 28 rows. Attach the white end to the pink end using slip stitches to form a ring.

EYES

You’ll need one white eye and a pink one. With pastel pink yarn, create a magic circle. 6 sc inside, Sl St into the first sc, fasten off leaving about 6 inches of yarn for sewing. Adjust the string of the magic circle to close it. Repeat once more with the white yarn.

ASSEMBLING

  • Step 1: Using the yarn needle, sew the eyes to the front of one of the cookies, pink one on the right, white on on the left.
  • Step 2: Align the “ice cream” edge so that the pink side aligns to the right side of the cookie and the white side aligns to the left side. Sew together with brown yarn.
  • Step 3: Sew the second cookie on the other side making sure everything is straight. Before finishing the second cookie, stuff with fiberfill until puffy, once you have finished sewing  around the cookie, fasten off, hide the yarn ends and you’re done!

Thank you so much for choosing my pattern!
If you liked this design please consider leaving a tip in the Tip Jar below (but don’t feel obligated to!)

I’D LOVE TO SEE YOUR PROJECTS! IF YOU HAVE PROGRESS PICTURES OR WANT TO SHARE YOUR FINISHED PROJECT PLEASE TAG NANO STITCHES ON SOCIAL MEDIA

You may sell your product providing pattern credit to Nano Stitches on Instagram, Etsy, Facebook, Twitter, Pinterest, Ravelry or any other social media in which you advertise. The pattern itself shall not be copied. If you sell the items you must use your own pictures for advertising. If you need assistance during the process or find someone else selling my pattern feel free to contact me on social media  or email me at nanostitches9@gmail.com

2 Inch Ditto Plant Pot Cozy FREE Crochet Pattern

I put together this simple yet wholesome pattern that I’m sure any Pokemon fan would enjoy ♡

The pattern is made to fit a 2inch pot and it includes space for a water drainage hole for watering your plant. This pattern could be easily modified to fit a bigger pot.

Materials:

  • 4.5mm crochet hook
  • Medium weight worsted yarn in Lilac and Black.
  • 6mm Safety eyes (or you could make those out of felt and sew them in place!)

Pattern

  • Round 1: Ch 12, sl st to 1st chain.
  • Round 2: (Sc 1, sc inc) X6
  • Round 3: (Sc 2, sc inc) X6:
  • Round 4: (Sc 3, sc inc) X6
  • Round 5: Back-loop sc all around
  • Round 6-16: (11 rounds) Sc around. Sl st at the end of the last round.

Add the eyes between rounds 7 and 8 with 4sc between them.

For the mouth sew a very long “v” with black yarn starting one row below the eyes and 2sc outside of each eye.

And you’re done! A simple project that is sure to add a lot of personality to your home

I’D LOVE TO SEE YOUR PROJECTS! IF YOU HAVE PROGRESS PICTURES OR WANT TO SHARE YOUR FINISHED PROJECT PLEASE TAG NANO STITCHES ON SOCIAL MEDIA!

You may sell your product providing pattern credit to Nano Stitches on Instagram, Etsy, Facebook, Twitter, Pinterest, Ravelry or any other social media in which you advertise. The pattern itself shall not be copied. If you sell the items you must use your own pictures for advertising. If you need assistance during the process or find someone else selling my pattern feel free to contact me on social media or email me at nanostitches9@gmail.com